Filter Pleatco PDO75-2000, Darlly 70759, SC730, Magnum D1-TY75, Dimension One Spas

Filter cleaning with FilterClean^Natural

Whirlpool filters consist of a special fleece. These are fabrics that can absorb a lot of grease and dirt. For proper cleaning, the filter must be placed in a warm cleaning solution with FilterClean^Natural for one night and rinsed thoroughly the next day. We recommend a special filter flosser for this purpose. SpaBalancer FilterClean^Natural was developed to remove fats from the fabric. In addition, it also contains a peroxide (active oxygen) that oxidizes biofilms and has a bleaching action, preventing the filter from yellowing. In addition, FilterClean^Natural eliminates unpleasant filter odours that would otherwise diffuse into the spa water. It is important that the filter is cleaned at least every two weeks and more frequently at the beginning. In case of water problems you should always start with clean filters and increase the filter life from 6 hours minimum to 8 hours or more.

Required products

Filter cleaner, filter flosser/ garden hose, container (e.g. bucket), optional SpaBalancer UltraShock.

Hint!

SpaBalancer Filter Flosser

Content 1 piece(s)

€39.90 *

Add to cart

SpaBalancer FilterClean Natural

Content 0.95 kilogram (€28.32 * / 1 kilogram)

€26.90 *

Add to cart

SpaBalancer UltraShock

Content 1 liter

€46.90 *

Add to cart

Step 1

Fill the bucket with hot water (approx. 55°C) and then add half a measuring cup (50ml) of SpaBalancer FilterClean^Natural.

Step 2

Place the filter in the bucket. The container must be large enough so that the filter is completely under water. Leave the filter in the cleaning solution for at least 12 hours.

Step 3

Rinse the filter with a filter flosser. First you should hold the flosser vertically and rinse the filter once all around. Then hold the flosser horizontally and repeat this procedure until only clean and clear water comes out of the filter.

Step 4 (optional)

For even more intensive cleaning, place the filter in a bucket with 10 litres of water and 20 ml of UltraShock for an entire night. In this way, the filter is cleaned thoroughly and the remaining biofilm is removed with the bacteria.