Filter Pleatco PCM100SV, Magnum AP100
Prices incl. VAT plus shipping costs
Delivery time approx. 5 - 8 working days (mon - fri)
- Order number: F1109
Alle Filtervliese bei Aqua Whirlpools sind mit Trilobal-Fasern ausgestattet. Dadurch können die Filter mehr Schmutz aufnehmen und sind langlebiger. Mehr Informationen zu Trilobal-Fasern finden Sie hier.
Innenkern speziell für Whirlpoolfilter designt um einen maximalen Durchfluss zu erreichen und somit eine höhere Filterleistung.
Product information "Filter Pleatco PCM100SV, Magnum AP100"
Similar to Pleatco PCM100SV, Magnum AP100 Whirlpool Filter
| Length | 745 mm |
| Diameter | 177 mm |
| Filter Area in Square-Feet | 100 |
| Filter Area in square Meter | 10,0 |
| Top: aperture | 76 mm |
| Bottom: aperture | 76 mm |
Replace these filters:
| Pleatco | PCM100SV |
| Magnum | AP100 |
Whirlpool manufacturers using this type of filter
- Whirlpool manufacturer
-
Whirlpool Series
-
Whirlpool Model
Related links to "Filter Pleatco PCM100SV, Magnum AP100"
Our filters are exclusively brand filters of the manufacturer Magnum from New Zealand. They are manufactured with the high-quality filter fleece from REEMAY®. Through direct purchasing in large quantities we can offer you very attractive prices. You receive high-quality products that have a very good filter performance, are easy to clean and thus increase the service life of your pumps and reduce electricity costs. Filters should be replaced after 12 months of filter life, as the filter fleece decreases over time.
- Whirlpool manufacturer
-
Whirlpool Series
-
Whirlpool Model
-
-
Our filters are exclusively brand filters of the manufacturer Magnum from New Zealand. They are manufactured with the high-quality filter fleece from REEMAY®. Through direct purchasing in large quantities we can offer you very attractive prices. You receive high-quality products that have a very good filter performance, are easy to clean and thus increase the service life of your pumps and reduce electricity costs. Filters should be replaced after 12 months of filter life, as the filter fleece decreases over time.
Filter cleaning with FilterCleanNatural
Whirlpool filters consist of a special fleece. These are fabrics that can absorb a lot of grease and dirt. For proper cleaning, the filter must be placed in a warm cleaning solution with FilterCleanNatural for one night and rinsed thoroughly the next day. We recommend a special filter flosser for this purpose. SpaBalancer FilterCleanNatural was developed to remove fats from the fabric. In addition, it also contains a peroxide (active oxygen) that oxidizes biofilms and has a bleaching action, preventing the filter from yellowing. In addition, FilterCleanNatural eliminates unpleasant filter odours that would otherwise diffuse into the spa water. It is important that the filter is cleaned at least every two weeks and more frequently at the beginning. In case of water problems you should always start with clean filters and increase the filter life from 6 hours minimum to 8 hours or more.
Required products
Filter cleaner, filter flosser/ garden hose, container (e.g. bucket), optional SpaBalancer UltraShock.
Step 1
Fill the bucket with hot water (approx. 55°C) and then add half a measuring cup (50ml) of SpaBalancer FilterCleanNatural.
Step 2
Place the filter in the bucket. The container must be large enough so that the filter is completely under water. Leave the filter in the cleaning solution for at least 12 hours.
Step 3
Rinse the filter with a filter flosser. First you should hold the flosser vertically and rinse the filter once all around. Then hold the flosser horizontally and repeat this procedure until only clean and clear water comes out of the filter.
Step 4 (optional)
For even more intensive cleaning, place the filter in a bucket with 10 litres of water and 20 ml of UltraShock for an entire night. In this way, the filter is cleaned thoroughly and the remaining biofilm is removed with the bacteria.
