SpaBalancer FilterClean Classic 1,0 Liter

SpaBalancer FilterClean Classic 1,0 Liter
18.90€
Content: 1 Liter

Prices incl. VAT plus shipping costs

Ready to ship today, Delivery time appr. 1-3 workdays (mon - fri)**

Reduce your shipping costs from 75,-€ *
Reduce your shipping costs from 75,-€ *
* This item will be shipped with DHL. For all items shipped with DHL, the shipping costs are reduced by €5.90 for goods with a basket value of €75 or more.
  • SB1022
trilobal seal
All Aqua Whirlpools filters are equipped with a Reemay® brand fleece. This means that the filters can absorb more dirt and have a longer service life. More information about Reemay® fleece can be found here.
High Flow Core
Inner core specially designed for whirlpool filters to achieve maximum flow and therefore higher filter performance.
Modern cartridge filters are made of a special fabric, which have millions of tiny passages.... more

Product information "SpaBalancer FilterClean Classic 1,0 Liter"

Modern cartridge filters are made of a special fabric, which have millions of tiny passages. The dirt is caught in these passages and is so retained. If the hot tub is carelessly cleaned, the bacteria will entrench themselves in the lining and form a biofilm that protects them. Additional fats, oils and dander are the food source for the bacteria. Then the filter becomes a water pollutant.Contaminated filters cause the filter pump to use more power, in turn shortening its life span.
For these reasons, it is important to thoroughly clean the filter regularly: SpaBalancer FilterClean dissolves organic dirt, grease and oil out of the filter lining. 
Clean the filter every two to three weeks(a weekly clean may be needed in the early days with SpaBalancer) and use a second set of filters during cleaning time. To do this, insert the filter into a container and add 100 ml to 200 ml of SpaBalancer FilterClean and then fill it with water until the filters are covered. The higher the concentration of SpaBalancer FilterClean, the better the cleaning effect. The amount of SpaBalancer FilterClean needed depends on the pollution present. Leave the filter in the tank with SpaBalancer FilterClean for 12 hours. Then remove the filter and rinse it thoroughly with a water hose. SpaBalancer FilterCleaner is recommended for this purpose. Replace your filter every two years. The nonwoven filter loses its effectiveness over the course of time. Even seemingly good filters can provide poor filter performance.
Instructions for use
Shake thoroughly before use
  • Clean the filter every 2-3 weeks
  • Place the filter in a container. Fill the container with water until the filter is covered. Add about 100 ml of filter cleaner to every 10 litres of water
  • Leave the filter in the cleaning solution for 12 hours
  • Remove the filter and rinse thoroughly

Whirlpool manufacturers using this type of filter
  • Whirlpool manufacturer
    • Whirlpool Series
      • Whirlpool Model

Related links to "SpaBalancer FilterClean Classic 1,0 Liter"
Our filters are exclusively brand filters of the manufacturer Magnum from New Zealand. They are manufactured with the high-quality filter fleece from REEMAY®. Through direct purchasing in large quantities we can offer you very attractive prices. You receive high-quality products that have a very good filter performance, are easy to clean and thus increase the service life of your pumps and reduce electricity costs. Filters should be replaced after 12 months of filter life, as the filter fleece decreases over time.
Read, write and discuss reviews... more
Customer evaluation for "SpaBalancer FilterClean Classic 1,0 Liter"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

Filter cleaning with FilterClean Natural Whirlpool filters consist of a special fleece. These... more

Filter cleaning with FilterCleanNatural

Whirlpool filters consist of a special fleece. These are fabrics that can absorb a lot of grease and dirt. For proper cleaning, the filter must be placed in a warm cleaning solution with FilterCleanNatural for one night and rinsed thoroughly the next day. We recommend a special filter flosser for this purpose. SpaBalancer FilterCleanNatural was developed to remove fats from the fabric. In addition, it also contains a peroxide (active oxygen) that oxidizes biofilms and has a bleaching action, preventing the filter from yellowing. In addition, FilterCleanNatural eliminates unpleasant filter odours that would otherwise diffuse into the spa water. It is important that the filter is cleaned at least every two weeks and more frequently at the beginning. In case of water problems you should always start with clean filters and increase the filter life from 6 hours minimum to 8 hours or more.


Required products

Filter cleaner, filter flosser/ garden hose, container (e.g. bucket), optional SpaBalancer UltraShock.


Step 1

Fill the bucket with hot water (approx. 55°C) and then add half a measuring cup (50ml) of SpaBalancer FilterCleanNatural.


Step 2

Place the filter in the bucket. The container must be large enough so that the filter is completely under water. Leave the filter in the cleaning solution for at least 12 hours.


Step 3

Rinse the filter with a filter flosser. First you should hold the flosser vertically and rinse the filter once all around. Then hold the flosser horizontally and repeat this procedure until only clean and clear water comes out of the filter.


Step 4 (optional)

For even more intensive cleaning, place the filter in a bucket with 10 litres of water and 20 ml of UltraShock for an entire night. In this way, the filter is cleaned thoroughly and the remaining biofilm is removed with the bacteria.

SDB FilterClean Classic
Labelling according to Regulation (EC) No 1272/2008 [CLP]
  • Signal word: DANGER
  • H290 May be corrosive to metals.
  • H314 Causes severe skin burns and eye damage.
  • P101 If medical advice is needed, have product container or label at hand.
  • P102 Keep out of reach of children.
  • P260 Do not breathe vapours/spray.
  • P280 Wear protective gloves/protective clothing/eye protection/face protection.
  • P301 + P330 + P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
  • P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
  • P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P310 Immediately call a POISON CENTER or doctor/physician.
  • P405 Store locked up.
  • P501 Dispose of contents/container in accordance with local/national regulation.
Contains:
  • sulfuric acid
  • Hydrochloric acid
Viewed