SpaBalancer FilterClean Natural

26.90€
Content: 0.95 Kilogramm (28.32€ / 1 Kilogramm)

Prices incl. VAT plus shipping costs

Ready to ship today, Delivery time appr. 1-3 workdays (mon - fri)**

Reduce your shipping costs from 75,-€ *
Reduce your shipping costs from 75,-€ *
* This item will be shipped with DHL. For all items shipped with DHL, the shipping costs are reduced by €5.90 for goods with a basket value of €75 or more.
  • SB1036
trilobal seal
All Aqua Whirlpools filters are equipped with a Reemay® brand fleece. This means that the filters can absorb more dirt and have a longer service life. More information about Reemay® fleece can be found here.
High Flow Core
Inner core specially designed for whirlpool filters to achieve maximum flow and therefore higher filter performance.
SpaBalancer FilterClean Natural  Special cleaner - Developed especially for... more

Product information "SpaBalancer FilterClean Natural"

SpaBalancer FilterClean Natural 
  • Special cleaner - Developed especially for whirlpool filters
  • Dissolves dirt, fats, oils and cosmetics
  • Dissolves lime deposits
  • Cleans the filter fleece
  • Dissolves biofilms and destroys bacteria
  • Is very economical. You can clean 19 filters with one can.
  • Is environmentally friendly and biodegradable
  • removes unpleasant odours
  • foam-reduced
Modern cartridge filters consist of a special fleece with millions of very small passages. The dirt gets caught in these diffusers and is thus retained. In the event of improper cleaning, bacteria accumulate in the fleece and form a biofilm that protects it. Additional fats, oils and skin flakes form the nutritional basis for the bacteria. Then the filter becomes a water polluter. Contaminated filters also cause a higher power consumption of the filter pump and shorten the service life of the filter pump. For these reasons it is important to clean the filters regularly and thoroughly: SpaBalancer FilterClean Natural dissolves organic soiling, grease and oils from the filter fleece. Clean the filters every two to three weeks(in the initial period with SpaBalancer a weekly cleaning may also be necessary) and use a second set of filters during the cleaning time. Place the filter in a container and add half a measuring cup(50 ml) of SpaBalancer FilterClean Natural and fill it with hot water until the filter is covered. In the case of larger containers or heavy soiling, increase the quantity to be added. Leave the filter in the cleaning solution for at least 12 hours. Then remove the filter and rinse it thoroughly with a strong jet of water. For even more intensive cleaning, place the filter in a bucket of 10 litres of water and 20 ml UltraShock for another night. This makes the filter even whiter and removes any remaining biofilm with bacteria. Replace your filters every two years. The filter fleece loses its filter effect over time. Even good-looking filters can then only provide a poor filter performance.

Whirlpool manufacturers using this type of filter
  • Whirlpool manufacturer
    • Whirlpool Series
      • Whirlpool Model

Related links to "SpaBalancer FilterClean Natural"
Our filters are exclusively brand filters of the manufacturer Magnum from New Zealand. They are manufactured with the high-quality filter fleece from REEMAY®. Through direct purchasing in large quantities we can offer you very attractive prices. You receive high-quality products that have a very good filter performance, are easy to clean and thus increase the service life of your pumps and reduce electricity costs. Filters should be replaced after 12 months of filter life, as the filter fleece decreases over time.
Use biocides safely. Always read the label and product information before use.

Gefahr

Gefahrenhinweise 
H290  Kann gegenüber Metallen korrosiv sein.
H314  Verursacht schwere Verätzungen der Haut und schwere Augenschäden.
Sicherheitshinweise 
P101  Ist ärztlicher Rat erforderlich, Verpackung oder Kennzeichnungsetikett bereithalten.
P102  Darf nicht in die Hände von Kindern gelangen.
P260  Staub nicht einatmen.
P280  Schutzhandschuhe/Schutzkleidung/Augenschutz/Gesichtsschutz tragen.
P301 + P330 + P331BEI VERSCHLUCKEN: Mund ausspülen. KEIN Erbrechen herbeiführen.
P303 + P361 + P353BEI BERÜHRUNG MIT DER HAUT (oder dem Haar): Alle kontaminierten Kleidungsstücke sofort ausziehen. Haut mit Wasser abwaschen oder duschen.
P305 + P351 + P338 BEI KONTAKT MIT DEN AUGEN: Einige Minuten lang behutsam mit Wasser spülen. Eventuell vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen.
P310  Sofort GIFTINFORMATIONSZENTRUM/Arzt anrufen.
P390  Verschüttete Mengen aufnehmen, um Materialschäden zu vermeiden.
P405  Unter Verschluss aufbewahren.
P501  Inhalt/Behälter einer Entsorgung gemäß den lokalen/nationalen Vorschriften zuführen.

Enthält Natriumhydroxid (CAS: 1310-73-2, EC: 215-185-5, Index-Nr.: 011-002-00-6), Natriumpercarbonat (CAS: 15630-89-4, EC: 239-707-6)

Read, write and discuss reviews... more
Customer evaluation for "SpaBalancer FilterClean Natural"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

!!! Gefahr Gefahrenhinweise   H290   Kann gegenüber Metallen korrosiv... more
Filter cleaning with FilterClean Natural Whirlpool filters consist of a special fleece. These... more

Filter cleaning with FilterCleanNatural

Whirlpool filters consist of a special fleece. These are fabrics that can absorb a lot of grease and dirt. For proper cleaning, the filter must be placed in a warm cleaning solution with FilterCleanNatural for one night and rinsed thoroughly the next day. We recommend a special filter flosser for this purpose. SpaBalancer FilterCleanNatural was developed to remove fats from the fabric. In addition, it also contains a peroxide (active oxygen) that oxidizes biofilms and has a bleaching action, preventing the filter from yellowing. In addition, FilterCleanNatural eliminates unpleasant filter odours that would otherwise diffuse into the spa water. It is important that the filter is cleaned at least every two weeks and more frequently at the beginning. In case of water problems you should always start with clean filters and increase the filter life from 6 hours minimum to 8 hours or more.


Required products

Filter cleaner, filter flosser/ garden hose, container (e.g. bucket), optional SpaBalancer UltraShock.


Step 1

Fill the bucket with hot water (approx. 55°C) and then add half a measuring cup (50ml) of SpaBalancer FilterCleanNatural.


Step 2

Place the filter in the bucket. The container must be large enough so that the filter is completely under water. Leave the filter in the cleaning solution for at least 12 hours.


Step 3

Rinse the filter with a filter flosser. First you should hold the flosser vertically and rinse the filter once all around. Then hold the flosser horizontally and repeat this procedure until only clean and clear water comes out of the filter.


Step 4 (optional)

For even more intensive cleaning, place the filter in a bucket with 10 litres of water and 20 ml of UltraShock for an entire night. In this way, the filter is cleaned thoroughly and the remaining biofilm is removed with the bacteria.

Viewed