SpaBalancer pH-Tester-Prämie

SpaBalancer pH-Tester-Prämie
This product is currently not available.
€22.32
Content: 1 piece(s)

Prices incl. VAT plus shipping costs

Delivery time approx. 5 - 8 working days

Regular customer discount
Regular customer discount
As a regular customer you will receive a discount on this article. You are a regular customer automatically if you have already ordered from us and have created a customer account. As a regular customer you get a discount on all articles in the category water care and spa filters.
Reduce your shipping costs from 75,-€ *
Reduce your shipping costs from 75,-€ *
* This item will be shipped with DHL. For all items shipped with DHL, the shipping costs are reduced by €5.90 for goods with a basket value of €75 or more.
  • PR1030
SpaBalancer Digital pH Tester - for the accurate measurement of the pH value of your spa.... more

Product information "SpaBalancer pH-Tester-Prämie"

SpaBalancer Digital pH Tester- for the accurate measurement of the pH value of your spa. The measuring instrument has a probe, which can be carefully calibrated. For this purpose, we have supplied you with 2 ready-made calibration fluids and a handy screwdriver.
See below to find out how to correctly calibrate your device.
 
Operating instructions for the pH Tester
 
Specifications
 
Measurement range: 0.00– 14.00 pH
Accuracy: +/- 0.1 pH
Temperature range: 0°- 60° Celsius
Calibration: Manual one-point calibration with screwdriver
Dimensions: 155 mm x 29 mm x 13 mm
Weight: 65 g
 
Operation
1) Remove the cover cap.
2) Turn on the unit using the switch at the top.
3) Calibrate the device.(Must be done during the initial operation, then again every 4 weeks)
4) For measuring, immerse the measuring diode of the pH Tester into the water and stir it slightly. Keep it immersed until the values in the display do not change.
5) After measuring, clean the measuring diode in distilled water and close the cap over the wet measuring diode. The measuring diode should not dry out.
6) Turn the unit off.
 
Calibrating
1) Turn the pH Tester on.
2) Immerse the measuring diode into our calibration solution, which should not be warmer than 25° Celsius.
3) Use the supplied screwdriver to turn the rear calibration screw until the display shows 7.0.
4) Calibrate the pH Tester every 4 weeks.
 
Maintenance and storage
If you have not used the pH Tester for a long time and the measuring diode has been exposed to the air, the display can be slow to show values and not display regularly. You should leave the pH Tester with the measuring diode in the water for a few hours.
Please note: the measuring diode is very fragile. Handle with care.
 
Low battery
If the display is no longer sharp or no longer showing, then the battery should be replaced. Pay attention to the polarity of the battery.
Battery type: 2x1.5V(LR44 button cell)
 
The pH Tester is provided with 2 x calibration liquid.
Related links to "SpaBalancer pH-Tester-Prämie"
Read, write and discuss reviews... more
Customer evaluation for "SpaBalancer pH-Tester-Prämie"
Write an evaluation
Evaluations will be activated after verification.

The fields marked with * are required.

SpaBalancer FilterClean Natural
SpaBalancer FilterClean Natural
Content 0.95 kilogram (€27.60 * / 1 kilogram)
€26.22 *
SpaBalancer Intensive Basic Cleaning Set
SpaBalancer Intensive Basic Cleaning Set
Content 1 set
€170.59 * €179.65 *
Filter Washer
Filter Washer
Content 1 piece(s)
€18.52 *
SpaBalancer SpaParfum Citrus
SpaBalancer SpaParfum Citrus
Content 1 piece(s)
€29.15 *
SpaBalancer Hardness Test Kit
SpaBalancer Hardness Test Kit
Content 1 piece(s)
€14.62 *
Viewed